Datacom Systems D56 Průvodce řešením problémů stáhnout pdf (Strana 84)

–84–

Keypad Functions

General Information Quick arming is always available, therefore the [#] key can be pressed

instead of entering the security code, for any of the arming procedures (Away,

HOME, INSTANT, etc.). The security code is always required, however,

when disarming the system.

The keypad allows the user to arm and disarm the system, and perform other

system functions, such as bypassing zones, and display zone descriptors.

Zone and system conditions (alarm, trouble, bypass) are displayed in the

Display Window.

When an alarm occurs, keypad sounding and external sounding will occur,

and the zone(s) in alarm will be displayed on the keypad. Pressing any key

will silence the keypad sounder for 10 seconds. Disarming the system will

silence both keypad and external sounders. When the system is disarmed,

any zones that were in an alarm condition during the armed period will be

displayed (memory of alarm). To clear this display, simply repeat the disarm

sequence (enter the security code and press the OFF key) again.

The keypads also feature chime annunciation, and 3 panic key pairs, or

individual panic keys (depending on keypad type – see Panic Keys next page),

for silent, audible, fire or personal emergency alarms. These keys can notify

the central station of an alarm condition, if that service is connected.

Arming Functions The following is a brief list of system commands and the resulting keypad

displays after entering those commands. For detailed information concerning

system functions, refer to the User's Manual.

Disarmed, Not Ready .... Before arming, the system must be in the

**SYSTEM READY** condition (all zones must

be intact). If the NOT READY message appears,

press the READY [

✱

] key on the keypad to display

faulted zones.

Arming Away .................. Enter code + AWAY [2] = ARMED**AWAY**

Arming Home.................. Enter code + HOME [3] = ARMED**HOME**

Arming Maximum .......... Enter code + [4] = ARMED MAXIMUM

(Ameritech does NOT advertise this capability.)

Arming Instant ............... Enter code + INSTANT [7] = HOME INSTANT

Disarming ........................ Enter code + OFF [1] = **SYSTEM READY**

Bypassing Zones............. Enter code + [6] + zone number(s). = *ZONE

BYPASSED* SYSTEM READY

Forced (Quick) Bypass.. (If enabled) To automatically bypass all faulted

zones, use the "Quick Bypass" method:

Enter code + [6], then wait for all open zones to

be displayed. Arm when display indicates

“bypass” and “ready to arm."

Chime Mode..................... Enter code + CHIME [9] = *CHIME MODE ON*

To turn chime off, enter code + CHIME again.

The AM6139 Alpha keypad contains the following dedicated quick

arming keys (not applicable to 5800 series wireless keypads):

A = arm AWAY

B = arm HOME

C = arm HOME INSTANT

D = When pressed, if programmed to do so, will send a special message to a

pager and display “Pager Msg sent” on the keypad for 30 seconds.

The message it sends is coded as 999-9999 and signifies ANY message

the user and recepient have decided is appropriate such as, “call me at

home,” “your mother-in-law is coming,” etc.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Datacom Systems D56 Průvodce řešením problémů Strana 84

Komentáře k této Příručce

Související produkty a manuály pro Sítě Datacom Systems D56