Datacom Systems D56 Průvodce řešením problémů stáhnout pdf (Strana 50)

–50–

Type 06

24-hour Silent Alarm

This zone type sends a report to the Central Station but provides no keypad

display or sounding. This zone type is usually assigned to a zone containing

an Emergency button.

Type 07

24-hour Audible Alarm

This zone type sends a report to the Central Station, and provides an alarm

sound at the keypad, and an audible external alarm. This zone type is

usually assigned to a zone that has an Emergency button.

Type 08

24-hour

Auxiliary Alarm

This zone type sends a report to Central Station and provides an alarm sound

at the keypad. (No bell output is provided). This zone type is usually

assigned to a zone containing a button for use in personal emergencies, or to a

zone containing monitoring devices such as water or temperature sensors, etc.

Type 09

Supervised Fire

(With Verification on

Zone 1)

This zone type provides a fire alarm on short circuit and a trouble condition

on open circuit. The bell output will pulse when this zone type is alarmed.

This zone type is always active and cannot be bypassed. This zone type can

be assigned to a control panel basic wired zone, any zone in a wired

zone expansion module, or wireless zones. When used with zone 1 on

the panel, 2-wire smoke detectors can be used. For an explanation of the

“verification” function, refer to the “Operation” paragraph in a previous

section titled 2-Wire Smoke Detector Installation.

Note: Only hardwired zone 1 can be programmed as a fire zone in UL

installations. However, any wireless zone can be used as a fire

zone.

Type 10

Interior w/Delay

This zone type gives entry delay #11 (using the programmed entry time), if

tripped when the panel is armed in the Away mode. Entry delay begins

whenever sensors in this zone are violated, regardless of whether or not an

entry/exit delay zone was tripped first. No entry delay is provided if tripped

when the panel is armed in the Maximum mode. Exit delay is present for any

arming mode. This zone type is bypassed when the panel is armed in

the HOME or INSTANT modes.

Type 20

Arm–Home

This is a special-purpose zone type used with 5800 series wireless pushbutton

units which will result in arming the system in the HOME mode when the

zone is activated. Pushbutton units send zone number as a user number to

central station when arming or disarming.

Type 21

Arm–Away

This is a special-purpose zone type used with 5800 series wireless pushbutton

units which will result in arming the system in the AWAY mode when the

zone is activated. Pushbutton units send zone number as a user number to

central station when arming or disarming.

Type 22

Disarm

This is a special-purpose zone type used with 5800 series wireless pushbutton

which will result in disarming the system when the zone is activated.

Type 23

No Alarm Response

This zone type can be used on a zone when an output relay action is desired,

but with no accompanying alarm (e.g., lobby door access).

Type 24

Silent Burglary

This zone type provides an instant alarm, with NO audible indication at any

keypad or external sounder, if the zone is faulted when the system is armed

in the AWAY, HOME, INSTANT, or MAXIMUM modes. This zone type is

usually assigned to all sensors or contacts on exterior doors and windows

where bells and/or sirens are NOT desired. A report is sent to the Central

Station.

NOTE: All of the zone types described are available for the wireless portion of the system, if used.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 103 104

Komentáře k této Příručce

Žádné komentáře

Datacom Systems D56 Průvodce řešením problémů Strana 50

Komentáře k této Příručce

Související produkty a manuály pro Sítě Datacom Systems D56